Net Welght: 2.825 Kg/pc
Gross Weight: 3.775kg/pc
42×40.6x38cm³/case of 8pc
Mount to API's,vapor valves and safety bars
Heat-treated, anodized aluminum construction
1/4 " NPT Connection Ports
Choice of standard piston end or paddle end (VRV-A Vapor Recovery Valves)
Adjustable stroke to accommodate length variations
lmproved seal design for long term performance & heavy duty plunger tip
Seals: Buna
4" cam and groove
hard - coated body for longer life
with sight glass
Designed in accordance with APIRP-1004, with a standard 4"TTMA Flange
High flow rate/low pressure drop design affords faster loading
The vapour recovery valve is mounted directly onto the recovery pipe of the vehicle.
The valve (vRV and gasket)must be mounted as shown in the figure.
The gasket used should be conductive. If a non-conductive gasket is used, a conductive connection must be established via the flange screws.
The fixing screws must not be over tightened.
The fittings for the 6 mm air hoses must be mounted at the VRV interlock.
The vapour tightness of the valve and the gasket must be checked.
The electrical conductivity from the VRV across the gasket to the vapour recovery pipe must be checked.
Metting EN133081:20o2 Standard