The normal applicable temperature of the oil pump is within 250 degrees. If it needs to transport high temperature medium, it can be customized as a high temperature type.

The oil transfer pump is suitable for conveying lubricating oil without solid particles and fibers, non-corrosive, temperature not higher than 250℃, viscosity of 5×10-6～1.5×10-3m2/s (5-1500cSt) or similar lubrication Oil and other liquids, as well as for hydraulic transmission systems. Oil pump flow: 1-58 cubic meters per hour. High temperature pump is suitable for conveying medium with high temperature and no impurities. It adopts mechanical seal and packing seal. It is used in plastic and rubber processing industry.

How to operate

The method of making diesel generator sets more fuel-efficient, reducing the water temperature. The water temperature of agricultural diesel engines is generally lower than 45 °C, so that the diesel cannot be completely burned, the viscosity of the oil is large, and the running resistance is increased. water temperature.

Protecting the best fuel supply advance angle Taking the most commonly used 195 diesel engine as an example, the optimum fuel supply advance angle is 16°-20°. When the diesel engine is used for a period of time, due to wear and tear, the fuel supply advance angle will decrease, resulting in a late fuel supply time and a large increase in fuel consumption. Therefore, it should be ensured that the oil supply angle is at the best angle.

Ensure that the machine does not leak oil. Diesel engine oil pipelines often have loopholes due to uneven joint surfaces, deformation or damage of gaskets. The solution is: apply the valve paint to the gasket and put it on the glass plate and grind it flat to correct the oil pipe joint; add a diesel recovery device, and use a plastic pipe to connect the oil return pipe on the oil nozzle with the hollow screw, so that the return oil flows into the fuel tank. .

More than half of the failures of diesel engines that are purified before oil use come from the oil supply system. The way to deal with it is: put the purchased diesel oil on hold for 2-4 days and then use it, which can precipitate 98% of impurities; if you buy it now, you can put two layers of silk cloth or toilet paper on the fuel tank refueling filter.

Change the practice of "big horse-drawn trolley" and "big machine with small water pump" commonly used on wells. Actually a waste. Improvement method: appropriately increase the pulley of the diesel engine, and increase the speed of the water pump when the diesel engine is running at a reduced speed, so that the flow and head are increased, and the purpose of energy saving is achieved.