Instructions for use of diesel water pump

1. After the diesel engine water pump is installed, check the amount of diesel in the fuel tank before use, and add enough diesel.

2. Please confirm whether the battery has enough power before using the battery that has not been used for a long time. Insert the key into the ON position and turn it to confirm whether the battery is charged. When the battery is dead or insufficient, please charge it before use. Diesel engine keys that have not been used for a long time should be unplugged from the battery to drain them.

3. The inlet and outlet pipes should be well connected to ensure that there is no air leakage in the inlet pipes. After adding half of the suction liquid of the pump body to the self-priming pump body, start the self-priming pump of the diesel engine.

4. Before starting the diesel engine water pump, the idle speed should be idled first, and then the diesel engine should be started.

5. Then insert the random key of the diesel water pump into the key control, turn right to start the diesel engine to the START position, the diesel engine will work for about 1 minute, and then put the idle speed device in the normal state, the diesel engine

6. Before stopping, make the diesel engine water pump idle, the diesel engine speed will drop slowly, and then turn the key to the left to the OFF position to stop running.


Instructions for use of ac diesel pump Operation precautions:

Diesel engine pump sets should be inspected before each use.

1. Whether the oil reaches the mark. Instructions for use of diesel engine water pump The oil is placed between the upper and lower scale lines, and should not exceed the upper scale line. The oil label can buy cf-415w/40, 4L small barrels.

2. Whether the diesel oil reaches the marking line. Diesel is purchased at regular gas stations (big gas stations such as Sinopec and PetroChina)! Diesel label: 0# or -10#.

Instructions for use of the diesel water pump "bleed air" before starting.

Before the water pump unit testing machine, add enough water to the water pump. Steps: loosen the water adding cock of the water pump—add water to the water pump—tighten the water adding cock.

Instructions for the use of diesel water pumps:

1. Familiarize yourself with the new machine. The familiarization time is 20 hours. After familiarization, change the oil.

2. Regularly check and replace the air filter element of the air filter!

3. Regularly inspect the operation of the unit during the use of the pump, and check whether the diesel engine leaks oil. Check whether there is any abnormal noise when the pump unit is running.

4. The operating environment of the unit requires protection from rain and wind, and ventilation is particularly important. Poor ventilation will cause the high temperature cylinder of the diesel engine.

5. When the machine does not run for a long time, regular maintenance of the machine should be carried out every year, especially the replacement of wood diesel in the machine.